Introduction
I need to search a piece of ABAP code in my SAP BW system or in the SAP BW/4HANA System over the Custom/Standard Class/Methods, Start Routine, End Routine, Expert routines, Transformations, Include Programs and on Custom/Standard Function modules.
There was a situation for me to find a particular function module used in all of the transformations and in the custom datasource’s within the SAP BW system and “where used list” on the function module did not highlight the transformations or start or end or expert routines where the function module was used. There was one more requirement to identify where all “Select * ” had been used in all the transformations, datasource’s and to fix the “*” with required fields. So I came up with this program to identify the code snippets used. This can be used in ECC system too if you are using the Embedded Analytics within the ECC system.
This blog is an enhancement to the blog Code search in the SAP BW | SAP Blogs
Applies to:
SAP BW 7.x system and BW/4HANA systems,
Summary
This Document describes how to search within the SAP BW start, end, expert routines, transformations, custom methods(BADI’s), Include Programs and custom function modules within the SAP BW system.
Author : Lakshminarasimhan Narasimhamurthy
Created on : 03/JAN/2021
Body
Requirement
Many a times, code within the SAP BW system will be in the methods of BADI, inside of the Transformations, Function modules and in the Include programs. For example if I need to find the code/logic used for a customer exit variable in SAP BW system, then I need to manually search in all the BADI’s/Methods. Manual search is complex and time consuming, hence I created a program and this program makes the code search easy, just i will type the code snippet to be searched then the output will be in the form of ALV grid showing line numbers and the area where the code is being used.
Note
The existing program searches in custom class/methods and custom Include Programs and in custom Function Modules. This can be changed by modifying the code as below, but i dont recommend this as search will take a long time.
select clsname from seoclass into table lt_clsname bypassing buffer
where clsname like ‘Z%’ . —> Remove the where clause to search in all class and methods
select progname from reposrc into table lt_include_programs where
r3state = ‘A’ and ( progname like ‘LZ%UXX’ or progname like ‘LZ%TOP’). —> Remove the “and ( progname like ‘LZ%UXX’ or progname like ‘LZ%TOP’)” to search in all Include programs.
select * from tfdir into table lt_tfdir where funcname like ‘Z%’. —> Remove the where clause to search in all function modules
ABAP Code
Example
Execute the program, then i need to find where all the “select *” is used and then change it to select <fields list>.
press F8 or execute button,then the output will be as below.
Then if i click on start routine the drill down will show the below.
Conclusion
This way i can search for the custom codes or even standard codes used within the SAP BW or SAP BW/4HANA system.
Okumaya devam et...
I need to search a piece of ABAP code in my SAP BW system or in the SAP BW/4HANA System over the Custom/Standard Class/Methods, Start Routine, End Routine, Expert routines, Transformations, Include Programs and on Custom/Standard Function modules.
There was a situation for me to find a particular function module used in all of the transformations and in the custom datasource’s within the SAP BW system and “where used list” on the function module did not highlight the transformations or start or end or expert routines where the function module was used. There was one more requirement to identify where all “Select * ” had been used in all the transformations, datasource’s and to fix the “*” with required fields. So I came up with this program to identify the code snippets used. This can be used in ECC system too if you are using the Embedded Analytics within the ECC system.
This blog is an enhancement to the blog Code search in the SAP BW | SAP Blogs
Applies to:
SAP BW 7.x system and BW/4HANA systems,
Summary
This Document describes how to search within the SAP BW start, end, expert routines, transformations, custom methods(BADI’s), Include Programs and custom function modules within the SAP BW system.
Author : Lakshminarasimhan Narasimhamurthy
Created on : 03/JAN/2021
Body
Requirement
Many a times, code within the SAP BW system will be in the methods of BADI, inside of the Transformations, Function modules and in the Include programs. For example if I need to find the code/logic used for a customer exit variable in SAP BW system, then I need to manually search in all the BADI’s/Methods. Manual search is complex and time consuming, hence I created a program and this program makes the code search easy, just i will type the code snippet to be searched then the output will be in the form of ALV grid showing line numbers and the area where the code is being used.
Note
The existing program searches in custom class/methods and custom Include Programs and in custom Function Modules. This can be changed by modifying the code as below, but i dont recommend this as search will take a long time.
select clsname from seoclass into table lt_clsname bypassing buffer
where clsname like ‘Z%’ . —> Remove the where clause to search in all class and methods
select progname from reposrc into table lt_include_programs where
r3state = ‘A’ and ( progname like ‘LZ%UXX’ or progname like ‘LZ%TOP’). —> Remove the “and ( progname like ‘LZ%UXX’ or progname like ‘LZ%TOP’)” to search in all Include programs.
select * from tfdir into table lt_tfdir where funcname like ‘Z%’. —> Remove the where clause to search in all function modules
ABAP Code
Kod:
*&---------------------------------------------------------------------*
*& Report ZBW_CODE_SEARCH
*&
*&---------------------------------------------------------------------*
*&
*&
*&---------------------------------------------------------------------*
************************************************************************
* Program Title : Code Search in SAP BW system *
* Description : To search code snippet in the *
* : Start Routine, End Routine, Expert Routine, *
* : of all the transformations(SAP *
* : as well as user defined transformations).In *
* : User defined Class as well as Methods(Z*). *
* : In case of classes, Include program, *
* : & Function module only the custom generated *
* : objects are considered.(Z* Objects). *
* : count of lines of code added to the display *
*----------------------------------------------------------------------*
report zbw_code_search.
type-pools : slis. " ALV Grid display
types : begin of lty_tranid,
tranid type rstranid,
startroutine type rssguid25,
endroutine type rssguid25,
expert type rssguid25,
sourcename type sobj_name,
targetname type sobj_name,
tranprog type rstran_progid,
end of lty_tranid.
types : begin of lty_abap_code,
codeid type rscodeid,
line_no type rslineno,
line type string,
end of lty_abap_code.
types: begin of lty_abap_det,
tranid type rstranid, " Transaction ID
routine type c length 25, " Start or end or expert
targetname type sobj_name, " source of the transformation
sourcename type sobj_name, " target of the transformation
string type string, " String which was searched
end of lty_abap_det.
types: begin of lty_class_det,
class_name type seoclsname, " Class Name
method type seocpdname, " Method Name
string type string, " String which was searched
end of lty_class_det.
types: begin of lty_include_prgm_det,
progname type progname, " Include Program Name
string type string, " String which was searched
end of lty_include_prgm_det.
types: begin of lty_fm_det,
fm type progname, " Function Module Name
string type string, " String which was searched
end of lty_fm_det.
types : begin of lty_objects,
objects type c length 20, " Type of Objects(Transformation, Class, Include and Function Module
lines type i,
end of lty_objects.
types : begin of lty_code_table,
line type i,
string type string,
end of lty_code_table.
data : lt_tranid type standard table of lty_tranid,
lt_tranid_1 type standard table of lty_tranid,
la_tranid type lty_tranid,
lt_abap type standard table of lty_abap_code,
la_abap type lty_abap_code,
lt_abap_det_start type standard table of lty_abap_det,
lt_abap_det_end type standard table of lty_abap_det,
lt_abap_det_expert type standard table of lty_abap_det,
lt_abap_det_1 type standard table of lty_abap_det,
la_abap_det type lty_abap_det,
la_abap_det_1 type lty_abap_det,
source type seop_source_string,
wa_source like line of source,
source_1 type seop_source_string,
cifkey type seoclskey,
cifref type ref to if_oo_clif_incl_naming,
clsref type ref to if_oo_class_incl_naming,
pool_source type seop_source_string,
source_line type line of seop_source_string,
tabix type sytabix,
l_string type string,
includes type seop_methods_w_include,
include type seop_method_w_include,
lt_clsname type standard table of seoclsname,
la_clsname type seoclsname,
la_class_det type lty_class_det,
lv_code_row_no type c length 10,
lt_class_det type standard table of lty_class_det,
la_object type lty_objects,
lt_object type standard table of lty_objects,
lt_include_programs type standard table of progname,
la_include_programs type progname,
la_fm_prg_name type progname,
lt_include_prgm_det type standard table of lty_include_prgm_det,
la_include_prgm_det type lty_include_prgm_det,
lt_fm_det type standard table of lty_fm_det,
la_fm_det type lty_fm_det,
lt_tfdir type standard table of tfdir,
la_tfdir type tfdir,
lv_tran_prgm type progname,
la_code_table type lty_code_table,
lt_code_table type standard table of lty_code_table,
lv_tabix type syst-tabix,
lv_tabix_1 type syst-tabix,
lv_lines type i.
*********************** ALV Grid *********************************
data: fieldcatalog type slis_t_fieldcat_alv with header line,
gd_layout type slis_layout_alv,
fieldcatalog_objects type slis_t_fieldcat_alv with header line.
gd_layout-colwidth_optimize = abap_true.
*********************** ALV Grid *********************************
selection-screen begin of block b1 with frame title text-001.
parameters : line type edpline obligatory. " String Input/Code snippet which needs to be searched
selection-screen end of block b1.
select
tranid
startroutine
endroutine
expert
sourcename
targetname
tranprog
from
rstran as a " Transformation Table
into table lt_tranid bypassing buffer
where
a~objvers = 'A'
and
( startroutine <> ' ' or endroutine <> ' ' or expert <> ' ' ). " Picking only records where the routines are not empty
if sy-subrc = 0. " If Entries are present in the table LT_TRANID
select
b~codeid
b~line_no
b~line
from
rsaabap as b " ABAP routine - source code
into table lt_abap
for all entries in
lt_tranid
where b~codeid = lt_tranid-startroutine or
b~codeid = lt_tranid-endroutine or
b~codeid = lt_tranid-expert.
if sy-subrc = 0. " Entries are present in the table LT_ABAP
" Start Routine, End Routine and Expert Routine only
loop at lt_tranid into la_tranid. " Looping for every transaction Id
loop at lt_abap into la_abap where codeid = la_tranid-startroutine.
if la_abap-line cs line.
la_abap_det-tranid = la_tranid-tranid. " Transaction ID
la_abap_det-routine = 'START'. " Start
la_abap_det-sourcename = la_tranid-sourcename. " Source name
la_abap_det-targetname = la_tranid-targetname. " Target name
shift la_abap-line left deleting leading space.
la_abap_det-string = la_abap-line.
append la_abap_det to lt_abap_det_start.
endif.
endloop.
loop at lt_abap into la_abap where codeid = la_tranid-endroutine.
if la_abap-line cs line.
la_abap_det-tranid = la_tranid-tranid. " Transaction ID
la_abap_det-routine = 'END'. " End
la_abap_det-sourcename = la_tranid-sourcename. " Source name
la_abap_det-targetname = la_tranid-targetname. " Target name
shift la_abap-line left deleting leading space.
la_abap_det-string = la_abap-line.
append la_abap_det to lt_abap_det_end.
endif.
endloop.
loop at lt_abap into la_abap where codeid = la_tranid-expert.
if la_abap-line cs line.
la_abap_det-tranid = la_tranid-tranid. " Transaction ID
la_abap_det-routine = 'EXPERT'. " Expert
la_abap_det-sourcename = la_tranid-sourcename. " Source name
la_abap_det-targetname = la_tranid-targetname. " Target name
shift la_abap-line left deleting leading space.
la_abap_det-string = la_abap-line.
append la_abap_det to lt_abap_det_expert.
endif.
endloop.
endloop.
endif.
endif.
" Selecting only Custom classes
" Only the Custom classes are created for Variables exit / F4 Exit / Virtual Char Exit etc and start with 'Z'
select clsname from seoclass into table lt_clsname bypassing buffer
where clsname like 'Z%' .
" Remove the where clause to search in all classes, not only in Custom classes
loop at lt_clsname into la_clsname.
clear : la_class_det, source.
cifkey = la_clsname.
" Search in class
" In the classes we use variables exit and F4 exit
call method cl_oo_include_naming=>get_instance_by_cifkey
exporting
cifkey = cifkey
receiving
cifref = cifref
exceptions
others = 1.
if sy-subrc <> 0.
* Implement suitable error handling here
else.
case cifref->clstype.
when seoc_clstype_class.
clsref ?= cifref.
read report clsref->class_pool
into pool_source.
read report clsref->locals_old
into source.
loop at source
into source_line.
if source_line ns '*"*'.
if source_line cs line and source_line is not initial.
shift source_line left deleting leading space.
lv_code_row_no = sy-tabix.
concatenate lv_code_row_no source_line into source_line separated by space.
la_class_det-class_name = la_clsname.
la_class_det-string = source_line.
append la_class_det to lt_class_det.
endif.
endif.
endloop.
read report clsref->locals_def
into source.
loop at source
into source_line.
if source_line ns '*"*'.
if source_line cs line and source_line is not initial.
shift source_line left deleting leading space.
lv_code_row_no = sy-tabix.
concatenate lv_code_row_no source_line into source_line separated by space.
la_class_det-class_name = la_clsname.
la_class_det-string = source_line.
append la_class_det to lt_class_det.
endif.
endif.
endloop.
read report clsref->locals_imp
into source.
loop at source
into source_line.
if source_line ns '*"*'.
if source_line cs line and source_line is not initial.
shift source_line left deleting leading space.
lv_code_row_no = sy-tabix.
concatenate lv_code_row_no source_line into source_line separated by space.
la_class_det-class_name = la_clsname.
la_class_det-string = source_line.
append la_class_det to lt_class_det.
endif.
endif.
endloop.
read report clsref->macros
into source.
loop at source
into source_line.
if source_line ns '*"*'.
if source_line cs line and source_line is not initial.
shift source_line left deleting leading space.
lv_code_row_no = sy-tabix.
concatenate lv_code_row_no source_line into source_line separated by space.
la_class_det-class_name = la_clsname.
la_class_det-string = source_line.
append la_class_det to lt_class_det.
endif.
endif.
endloop.
read report clsref->public_section
into source.
loop at source
into source_line.
if source_line ns '*"*'.
if source_line cs line and source_line is not initial.
shift source_line left deleting leading space.
lv_code_row_no = sy-tabix.
concatenate lv_code_row_no source_line into source_line separated by space.
la_class_det-class_name = la_clsname.
la_class_det-string = source_line.
append la_class_det to lt_class_det.
endif.
endif.
endloop.
read report clsref->protected_section
into source.
loop at source
into source_line.
if source_line ns '*"*'.
if source_line cs line and source_line is not initial.
shift source_line left deleting leading space.
lv_code_row_no = sy-tabix.
concatenate lv_code_row_no source_line into source_line separated by space.
la_class_det-class_name = la_clsname.
la_class_det-string = source_line.
append la_class_det to lt_class_det.
endif.
endif.
endloop.
read report clsref->private_section
into source.
loop at source
into source_line.
if source_line ns '*"*'.
if source_line cs line and source_line is not initial.
shift source_line left deleting leading space.
lv_code_row_no = sy-tabix.
concatenate lv_code_row_no source_line into source_line separated by space.
la_class_det-class_name = la_clsname.
la_class_det-string = source_line.
append la_class_det to lt_class_det.
endif.
endif.
endloop.
concatenate 'CLASS' cifkey 'IMPLEMENTATION' into l_string separated by space.
loop at pool_source
from tabix
into source_line.
if source_line cs 'ENDCLASS'.
if ( source_line cs line and source_line is not initial ).
shift source_line left deleting leading space.
lv_code_row_no = sy-tabix.
concatenate lv_code_row_no source_line into source_line separated by space.
la_class_det-class_name = la_clsname.
la_class_det-string = source_line.
append la_class_det to lt_class_det.
endif.
endif.
endloop.
* method implementation
includes = clsref->get_all_method_includes( ).
loop at includes
into include.
read report include-incname
into source.
loop at source
into source_line.
if source_line cs line.
if source_line is not initial.
shift source_line left deleting leading space.
lv_code_row_no = sy-tabix.
concatenate lv_code_row_no source_line into source_line separated by space.
la_class_det-class_name = la_clsname.
la_class_det-method = include-cpdkey-cpdname.
la_class_det-string = source_line.
append la_class_det to lt_class_det.
endif.
endif.
endloop.
endloop.
endcase.
endif.
endloop.
" Include program
" Top include and UXX includes only
select progname from reposrc into table lt_include_programs where
r3state = 'A' and ( progname like 'LZ%UXX' or progname like 'LZ%TOP').
" The staement "and ( progname like 'LZ%UXX' or progname like 'LZ%TOP')" can be
" removed to search in all Includes not only the Custom Includes
if sy-subrc = 0.
loop at lt_include_programs into la_include_programs.
read report la_include_programs into source.
if sy-subrc = 0.
loop at source
into source_line.
if source_line cs line.
la_include_prgm_det-progname = la_include_programs.
la_include_prgm_det-string = source_line.
append la_include_prgm_det to lt_include_prgm_det.
endif.
endloop.
endif.
endloop.
endif.
" Function modules
select * from tfdir into table lt_tfdir where funcname like 'Z%'.
" The code "where funcname like 'Z%'" can be removed to search in all Function Modules
" not only limiting it to Custom Function Modules
if sy-subrc = 0.
loop at lt_tfdir into la_tfdir.
replace 'SAP' in la_tfdir-pname with ''.
condense la_tfdir-pname.
concatenate la_tfdir-pname 'U' la_tfdir-include into la_tfdir-pname.
read report la_tfdir-pname into source.
if sy-subrc = 0.
loop at source into source_line.
if source_line cs line.
la_fm_det-fm = la_tfdir-funcname.
shift source_line left deleting leading space.
lv_code_row_no = sy-tabix.
concatenate lv_code_row_no source_line into source_line separated by space.
condense source_line.
la_fm_det-string = source_line.
append la_fm_det to lt_fm_det.
endif.
endloop.
endif.
endloop.
endif.
" Transformations
" Code present in the areas other than
" start/end/expert routines
select
tranid
startroutine
endroutine
expert
sourcename
targetname
tranprog
from
rstran as a " Transformation Table
into table lt_tranid bypassing buffer
where
a~objvers = 'A'.
loop at lt_tranid into la_tranid.
clear : lv_tran_prgm, source, lt_code_table, la_code_table, lv_tabix, lv_tabix_1.
concatenate 'GP' la_tranid-tranprog into lv_tran_prgm.
read report lv_tran_prgm into source.
loop at source
into source_line.
la_code_table-line = syst-tabix.
la_code_table-string = source_line.
append la_code_table to lt_code_table.
endloop.
" End Routine removed
loop at lt_code_table into la_code_table where string cs 'method end_routine.'.
lv_tabix = syst-tabix.
loop at lt_code_table into la_code_table where string cs 'endmethod.' and line >= lv_tabix.
lv_tabix_1 = syst-tabix.
exit.
endloop.
delete lt_code_table where line between lv_tabix and lv_tabix_1.
endloop.
" Start Routine removed
loop at lt_code_table into la_code_table where string cs 'method start_routine.'.
lv_tabix = syst-tabix.
loop at lt_code_table into la_code_table where string cs 'endmethod.' and line >= lv_tabix.
lv_tabix_1 = syst-tabix.
exit.
endloop.
delete lt_code_table where line between lv_tabix and lv_tabix_1.
endloop.
loop at lt_code_table
into la_code_table.
if la_code_table-string cs line.
if la_code_table-string is not initial.
lv_code_row_no = la_code_table-line.
shift la_code_table-string left deleting leading space.
concatenate lv_code_row_no la_code_table-string into la_code_table-string separated by space.
la_abap_det_1-sourcename = la_tranid-sourcename.
la_abap_det_1-tranid = la_tranid-tranid.
la_abap_det_1-targetname = la_tranid-targetname.
la_abap_det_1-string = la_code_table-string.
append la_abap_det_1 to lt_abap_det_1.
endif.
endif.
endloop.
endloop.
fieldcatalog_objects-fieldname = 'OBJECTS'.
fieldcatalog_objects-seltext_m = 'OBJECTS'.
fieldcatalog_objects-outputlen = '40'.
fieldcatalog_objects-row_pos = 1.
fieldcatalog_objects-col_pos = 1.
fieldcatalog_objects-hotspot = 'X'.
append fieldcatalog_objects to fieldcatalog_objects.
clear fieldcatalog_objects.
fieldcatalog_objects-fieldname = 'LINES'.
fieldcatalog_objects-seltext_m = 'LINES COUNT'.
fieldcatalog_objects-outputlen = '40'.
*fieldcatalog_objects-row_pos = 1.
fieldcatalog_objects-col_pos = 2.
*fieldcatalog_objects-hotspot = 'X'.
append fieldcatalog_objects to fieldcatalog_objects.
clear fieldcatalog_objects.
la_object-objects = 'START ROUTINE'.
DESCRIBE TABLE lt_abap_det_start lines lv_lines.
la_object-lines = lv_lines.
append la_object to lt_object.
la_object-objects = 'END ROUTINE'.
DESCRIBE TABLE lt_abap_det_end lines lv_lines.
la_object-lines = lv_lines.
append la_object to lt_object.
la_object-objects = 'EXPERT ROUTINE'.
DESCRIBE TABLE lt_abap_det_expert lines lv_lines.
la_object-lines = lv_lines.
append la_object to lt_object.
la_object-objects = 'TRANFORMATIONS'.
DESCRIBE TABLE lt_abap_det_1 lines lv_lines.
la_object-lines = lv_lines.
append la_object to lt_object.
la_object-objects = 'CLASS'.
DESCRIBE TABLE lt_class_det lines lv_lines.
la_object-lines = lv_lines.
append la_object to lt_object.
la_object-objects = 'INCLUDE PROGRAMS'.
DESCRIBE TABLE lt_include_prgm_det lines lv_lines.
la_object-lines = lv_lines.
append la_object to lt_object.
la_object = 'FUNCTION MODULES'.
DESCRIBE TABLE lt_fm_det lines lv_lines.
la_object-lines = lv_lines.
append la_object to lt_object.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = sy-repid
i_callback_user_command = 'USER_COMMAND'
it_fieldcat = fieldcatalog_objects[]
tables
t_outtab = lt_object
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
* Implement suitable error handling here
endif.
form user_command using fp_ucomm like sy-ucomm
fp_selfield type slis_selfield.
clear : fieldcatalog, fieldcatalog[].
if fp_ucomm = '&IC1'.
if fp_selfield-value = 'START ROUTINE'.
fieldcatalog-fieldname = 'TRANID'.
fieldcatalog-seltext_m = 'TRANSFORMATION'.
fieldcatalog-outputlen = '40'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'ROUTINE'.
fieldcatalog-seltext_m = 'ROUTINE'.
fieldcatalog-outputlen = '20'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'SOURCENAME'.
fieldcatalog-seltext_m = 'SOURCE'.
fieldcatalog-outputlen = '50'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'TARGETNAME'.
fieldcatalog-seltext_m = 'TARGET'.
fieldcatalog-outputlen = '30'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'STRING'.
fieldcatalog-seltext_m = 'SEARCHED STRING'.
fieldcatalog-outputlen = '72'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = sy-repid
it_fieldcat = fieldcatalog[]
i_save = 'X'
* IS_VARIANT = G_VARIANT
tables
t_outtab = lt_abap_det_start
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
elseif fp_selfield-value = 'END ROUTINE'.
fieldcatalog-fieldname = 'TRANID'.
fieldcatalog-seltext_m = 'TRANSFORMATION'.
fieldcatalog-outputlen = '40'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'ROUTINE'.
fieldcatalog-seltext_m = 'ROUTINE'.
fieldcatalog-outputlen = '20'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'SOURCENAME'.
fieldcatalog-seltext_m = 'SOURCE'.
fieldcatalog-outputlen = '50'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'TARGETNAME'.
fieldcatalog-seltext_m = 'TARGET'.
fieldcatalog-outputlen = '30'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'STRING'.
fieldcatalog-seltext_m = 'SEARCHED STRING'.
fieldcatalog-outputlen = '72'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = sy-repid
it_fieldcat = fieldcatalog[]
i_save = 'X'
* IS_VARIANT = G_VARIANT
tables
t_outtab = lt_abap_det_end
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
elseif fp_selfield-value = 'EXPERT ROUTINE'.
fieldcatalog-fieldname = 'TRANID'.
fieldcatalog-seltext_m = 'TRANSFORMATION'.
fieldcatalog-outputlen = '40'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'ROUTINE'.
fieldcatalog-seltext_m = 'ROUTINE'.
fieldcatalog-outputlen = '20'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'SOURCENAME'.
fieldcatalog-seltext_m = 'SOURCE'.
fieldcatalog-outputlen = '50'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'TARGETNAME'.
fieldcatalog-seltext_m = 'TARGET'.
fieldcatalog-outputlen = '30'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'STRING'.
fieldcatalog-seltext_m = 'SEARCHED STRING'.
fieldcatalog-outputlen = '72'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = sy-repid
it_fieldcat = fieldcatalog[]
i_save = 'X'
* IS_VARIANT = G_VARIANT
tables
t_outtab = lt_abap_det_expert
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
elseif fp_selfield-value = 'TRANFORMATIONS'.
fieldcatalog-fieldname = 'TRANID'.
fieldcatalog-seltext_m = 'TRANSFORMATION'.
fieldcatalog-outputlen = '40'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'SOURCENAME'.
fieldcatalog-seltext_m = 'SOURCE'.
fieldcatalog-outputlen = '50'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'TARGETNAME'.
fieldcatalog-seltext_m = 'TARGET'.
fieldcatalog-outputlen = '30'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'STRING'.
fieldcatalog-seltext_m = 'SEARCHED STRING'.
fieldcatalog-outputlen = '72'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = sy-repid
it_fieldcat = fieldcatalog[]
i_save = 'X'
* IS_VARIANT = G_VARIANT
tables
t_outtab = lt_abap_det_1
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
elseif fp_selfield-value = 'CLASS'.
fieldcatalog-fieldname = 'CLASS_NAME'.
fieldcatalog-seltext_m = 'Class Name'.
fieldcatalog-outputlen = '40'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'METHOD'.
fieldcatalog-seltext_m = 'Method Name'.
fieldcatalog-outputlen = '61'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'STRING'.
fieldcatalog-seltext_m = 'String'.
fieldcatalog-outputlen = '20'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = sy-repid
it_fieldcat = fieldcatalog[]
is_layout = gd_layout
* i_save = 'X'
tables
t_outtab = lt_class_det
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
* Implement suitable error handling here
endif.
elseif fp_selfield-value = 'INCLUDE PROGRAMS'.
fieldcatalog-fieldname = 'PROGNAME'.
fieldcatalog-seltext_m = 'Include Program Name'.
fieldcatalog-outputlen = '40'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'STRING'.
fieldcatalog-seltext_m = 'String'.
fieldcatalog-outputlen = '61'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = sy-repid
it_fieldcat = fieldcatalog[]
is_layout = gd_layout
* i_save = 'X'
tables
t_outtab = lt_include_prgm_det
exceptions
program_error = 1
others = 2.
elseif fp_selfield-value = 'FUNCTION MODULES'.
fieldcatalog-fieldname = 'FM'.
fieldcatalog-seltext_m = 'Function Module Name'.
fieldcatalog-outputlen = '40'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'STRING'.
fieldcatalog-seltext_m = 'String'.
fieldcatalog-outputlen = '61'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = sy-repid
it_fieldcat = fieldcatalog[]
is_layout = gd_layout
* i_save = 'X'
tables
t_outtab = lt_fm_det
exceptions
program_error = 1
others = 2.
endif.
endif.
endform.Example
Execute the program, then i need to find where all the “select *” is used and then change it to select <fields list>.
press F8 or execute button,then the output will be as below.
Then if i click on start routine the drill down will show the below.
Conclusion
This way i can search for the custom codes or even standard codes used within the SAP BW or SAP BW/4HANA system.
Okumaya devam et...